A series of El Niño-enhanced storms will continue to bring more beneficial rain and snow along with hazards to California and the southwestern U.S. in absence of a pineapple express.
The above-average temperatures in the tropical Pacific Ocean, known as El Niño, tend to strengthen the storm track into the West Coast and occasionally California during the winter.
The current El Niño has tied the strength of the El Niño during 1997, which was the strongest on record.
The storms which initially brought rain, snow and ice to much of the Pacific coast of the United States to start the week will spiral progressively farther south into Friday.
US El Nino Forecast: California to bear brunt of impacts this winter
Late-week winter storm to spread snow, ice and rain across central US
Polar vortex to usher widespread cold, snow chances into eastern US during mid-January
By Kristina Pydynowski – AccuWeather
A quick shot of cold air will lead the first widespread ice and snow event of the season across the northeastern U.S. into Tuesday night.
The storm that unleashed severe weather, ice and blizzard conditions across the south-central United States this past weekend will impact the Northeast into Tuesday night.
Fresh cold air will set the stage for more widespread snow and ice to fall than with recent storms in the Northeast from New York state and New England northward to Quebec, Ontario, New Brunswick and Nova Scotia.
“The worst travel conditions in the Northeast will continue through Tuesday morning across northern and eastern New York and New England,” AccuWeather Senior Meteorologist Brett Anderson said. “Roads that are not treated will become treacherous and people may not be aware of the hazardous situation.”
By Alex Sosnowski – AccuWeather
Travel hazards, delays and disruptions associated with rain, ice and snow will continue over the Central states through the rest of the Thanksgiving weekend.
Rain, ice and snow will force motorists to slow down and will lead to airline delays over thousands of square miles from the Rockies to the Great Lakes and Mississippi Valley.
The weather will have little impact on travel along the Atlantic Seaboard, Appalachians and Pacific coast for much of the long weekend.
A major Thanksgiving Day storm threatens to ruin holiday events across the Central states with flooding rain, snow, a glaze of ice and fog.
The storm will continue to push through a large portion of the West through Wednesday.
According to AccuWeather Senior Meteorologist Dave Bowers, “People traveling either a short or long distance from the eastern slopes of the Rockies to the Plains, Mississippi Valley and Great Lakes region are likely to encounter delays into Friday.”
Thanksgiving Day Football: Cold Rain to Soak Fans as Green Bay Packers Take on Chicago Bears
Black Friday Forecast: Storm May Pester Shoppers From Texas to Michigan
Warmth to Surge Across Northeast US for Thanksgiving, Black Friday
By Rich M
Of all the things you can use to start a fire, water would be the one that most people would say is impossible.
After all, we use water to put out fires, so there really isn’t any way to start a fire with it… or is there? Actually, there are several ways of starting a fire with water; and while some might be considered mere tricks to use for impressing your friends, they will all work to get a fire going in a pinch – and some may be very useful for a survival situation.
To even think about using water to start a fire we need to think a little bit differently than we normally do. Dousing a fire with water works for two reasons: because the water removes heat from the fire and because it prevents oxygen from getting to the fuel. Since fire requires fuel, oxygen and heat, by removing two of those we eliminate the fire. However, water has other properties than those which are used to put out a fire and it is those properties which we need to use in order to start a fire with it.
Using Water and Sunlight to Start a Fire
The first several ways we’re going to look at all have one thing in common; in them, the water is used as a lens to focus the sun’s rays. Remember when you were little and used a magnifying glass to burn ants and leaves? You were really practicing survival skills, skills that can keep you alive when you need a fire.
Water and a Light Bulb
For the first method, you’ll need an old incandescent light bulb. The new CFL bulbs won’t work for this. Start by cutting a hole in the metal base of the bulb and removing the glass stem with the wires attached to it. Then, fill the bulb with water, swishing it around. You’ll notice that the white substance on the inside of the bulb starts coming off in the water. Replace the water as many times as necessary to get all of that out and have clean, clear water in the bulb.
You can’t have any air in the bulb to use it for starting a fire, so put a balloon filled with water over the light bulb’s base, squeezing out as much air as possible. The remaining air can be trapped in the balloon and tied off.
The water has now converted your dead light bulb into a perfect magnifying glass, which can be used to focus the sun’s rays onto some tinder, starting a fire.
Water and Plastic Wrap
If you don’t have an old light bulb handy, never fear; there are other ways of making a water lens. Take a piece of plastic wrap and use it to line a small bowl (about fist sized), fitting it to conform to the shape of the bowl. Pour water into the plastic wrap, filling the small bowl most of the way full. Then gather up the edges of the plastic wrap, making a bag filled with water. Twist the edges together, tightening up the plastic wrap to the point where it becomes a hard ball filled with water.
You now have a lens that you can use to start a fire. You just need to find the focal length, where the sun’s light will be the most concentrated.
Water, Plastic Wrap and a Picture Frame
Some of us are a bit clumsy with the plastic wrap and have trouble making a ball of it filled with water. That’s OK, because there are other ways in which we can use that plastic wrap and water to make our lens.
Start with an empty picture frame, about 8×10 in size. Wrap it in plastic wrap, being sure to make the wrap go all the way across the frame. Support the edges of this wrapped frame on anything which can hold it level at a couple of feet off the ground. Then, pour water into the plastic wrap. As you do, the wrap will stretch, forming a perfect lens filled with water.
Now all you’ve got to do is find the focal point below the lens and put your tinder there so that your water lens can start your fire.
Water and a Plastic Bottle
Plastic water or drink bottles can be used with water to make a lens as well. The best bottles are clear plastic ones which have very little texture to them. Every dip and swirl in the surface of the plastic will reduce its efficiency. The best bottles are those that look like a couple of balls stuck together.
Story continues below video
Remove the label from the bottle and clean it out. Any debris left in or on the bottle will reduce its effectiveness. Fill the bottle all the way to the brim with clean water and cap it. You want to make sure that you don’t have any air bubbles in there, as they will ruin the lens effect. Use your water-filled bottle as a lens to start a fire.
Water and Cold
Here’s an even crazier use of water to start a fire. If you’re out in the woods in the wintertime and can find a partially frozen-over stream, you have the perfect water to start a fire with. Chip off a chunk of clear ice from over the stream. Avoid the ice which looks white in color, as that has air bubbles in it, which will ruin the lens effect.
The larger your chunk of ice is, the better a lens you can make out of it; however, it will require more time and work. A good size lens is about five inches in diameter. With your knife, chip the ice to a round circle and then chip the opposite surfaces to make them both convex. Once you have the lens shaped to the right configuration, you’ve got to do the hard part. Take your gloves off and use the heat of your hands to warm the surface of the ice, smoothing it and shaping it to the final lens shape.
A lot will depend on how well you can form the ice; but if you can make a nice convex surface on both surfaces, you can end up with a lens that will work quite well to start a fire. The more convex the surfaces, the better the lens will focus the light, producing more heat and starting the fire faster.
Water and Chemicals
We all tend to forget that water is a chemical. As such, it reacts with some other types of chemicals, producing a wide range of effects. With the right chemicals, you can make water start a fire by chemical reaction.
Sodium and Water
When sodium and water are mixed together in the right circumstances, they will burst into flame. Please note that this is pure sodium and not sodium chloride, otherwise known as table salt. You’re not going to get a fire out of salty water.
To do this, you need to prepare a place for the fire. Start with a small pan or a large jar lid. Place one square of toilet paper on your pan, covering it as much as possible. Make a chimney out of half of the inner cardboard core of a toilet paper roll by cutting it in half, across the tube and cutting a half circle out of one end. That end will go down, allowing you to put the water and sodium together.
Place a small amount of sodium on the toilet paper in the pan (about 1/4 teaspoon) and place the chimney over it. Then loosely stuff some more toilet paper in the top of the chimney, so that it will catch fire from the sodium. To ignite the fire, pour a tablespoon of water onto the toilet paper, as close to the opening in the chimney as possible. Step back and within a few seconds the sodium will ignite.
Ammonium Nitrate, Sodium Chloride, Zinc Dust and Water
Mix 3 grams of ammonium nitrate and a half gram of table salt together in a mortar and pestle. You can get ammonium nitrate by cutting open the type of cold pack used for sprains and other injuries. Grind the two together, making a fine powder.
Add six grams of zinc powder and continue grinding. Be very careful at this point, as any moisture can cause the mixture to combust. Once it is all ground well, it is ready to use. Place the mixture in a flameproof container and add a few drops of water, stepping back quickly. The mixture will burst into flame almost explosively.
You can accomplish the same thing using ammonium chloride instead of sodium chloride, but table salt is easier to find.
Calcium Chloride and Water
Calcium chloride used to be called “miner’s carbide.” The lamps that miners used to strap to their heads, back in the time of the Old West, were lit by this. When calcium chloride (which is a naturally occurring mineral) mixes with water, it produces acetylene.
To make a fire with calcium chloride and water, place a small amount of calcium chloride in a flame-proof container. Add a few drops of water. The chemical reaction will start immediately, releasing acetylene. Strike a spark with a ferro rod or flint and steel and it will start burning.
What fire-starting tips would you add? Tell us in the comments section below.
By By Alex Sosnowski
Similar to the days prior to Thanksgiving, the worst weather is occurring on the days prior to Christmas as millions of travelers take to the roads and skies in the United States and southern Canada.
According to AAA, 94.5 million people will travel 50 miles or more over the holiday season, spanning Dec. 21 to Jan. 1.
Most of the travel troubles will be caused by a single storm system that will continue to affect much of the Midwest and Eastern states through Monday.
The storm is bringing a wide variety of weather ranging from temperature extremes to heavy snow, ice, flooding rain and fog. While the worst of the severe weather is over, a few isolated gusty thunderstorms will still erupt on Sunday.
According to AccuWeather.com Severe Weather Expert Henry Margusity, “This is a spring storm stuck in a winter pattern that threatens to combine slippery travel and flight delays with the dangers of flooding and violent thunderstorms.”
Weekend Snowstorm Spanning Thousands of Miles
The main storm this weekend began putting down snow across the northern Texas Panhandle and western Oklahoma on Saturday.
Heavy snow will continue along a northeasterly path on Sunday from the vicinity of southern Wisconsin to much of northern Michigan and across central Ontario, southern Quebec and northern New Brunswick.
The heaviest snow totals have and will continue to top 6 inches.
Ice and a wintry mix is also another concern for travelers with the storm across southern Ontario, along the St. Lawrence River in Ontario, northern upstate New York, northern New England and central and southern New Brunswick.
Enough ice had accumulated from Oklahoma, Kansas, Missouri and Illinois on Saturday to down trees and cause widespread power outages. This will continue into northern New England and neighboring Canada through Sunday.
The snow and ice could bring vehicles to a crawl or possibly shut down portions of I-75, I-91 and I-94 in the U.S., and highways 2, 20, 40 and 401 in Canada. Numerous road closures were already being reported on Saturday.
Soaking Rain Spreading to the East Coast
A cold front associated with the storm system will continue to spread drenching rain and thunderstorms toward the Atlantic Seaboard through Monday. Downpours, poor visibility and locally gusty winds could cause travel delays during this time from Boston to New York City, Philadelphia, Washington, D.C., Charlotte and Atlanta.
Until then, much of the area will bask in record-challenging warmth.
The heavy rain on Sunday will remain focused on the area from near Mobile, Ala., to the central and southern Appalachians. Atlanta lies in this zone.
Some rain will reach Boston, New York City and Washington, D.C., before the day is over.
Episodes of dense fog could also be a player in slowing ground travel and causing flight delays on Sunday, especially from around the Great Lakes to the Northeast. Snow still covering the ground across parts of the Northeast will work to enhance dense fog formation.
The heavy rain will stretch from the Florida Panhandle to New Jersey on Sunday night, soaking Charlotte, N.C., Washington, D.C., and Philadelphia.
On Monday, most of the East Coast–with the exception of the Florida Peninsula–will be dealing with the soaking rain that threatens to slow down motorists and airline passengers.
Dangerous Thunderstorms, Tornado Risk
Farther south, Saturday brought damaging thunderstorms and tornadoes from parts of central Texas and Alabama to Indiana through Saturday night.
Luckily, the chance for severe storms lessens on Sunday and Monday. However, there could be some locally strong winds with the passing of the front across the mid-Atlantic and Southeast to start the new week.
Better Travel Conditions by Christmas Eve
In much of the Southwest, the weather will be good for travel through Christmas Day.
Flurries could coat the ground in parts of the Northeast during Christmas Eve, but much of this snow would not adhere to roads.
Some snow could fall across the Great Lakes and northern Plains on Christmas Day, and rain showers may hug the Atlantic Coast from Florida to North Carolina.
Over much of the nation, weather for Tuesday and Christmas Day will be conducive to traveling. – More at AccuWeather